Banjo painting

After all of the fun of Boxing Day I had to remove the Banjo and paint that as it was looking rather forlorn in its current state. Again the angle grinder was used, and I got a coat of undercoat on it on the 26th, another on the 27th, and this morning I painted the first topcoat.

This evening I spent some time over in the workshop drilling and tapping bolt holes for the inverter, which I've decided to mount on the rear of the main column. There were also many holes in the column from earlier fittings, so I decided to fill all of these before I start any painting. Again I'm probably being a bit too precious about this but I do want it to look nice.

I want to cover the inverter and have some sheet steel (stainless I believe) in the workshop that I can use for this. That will ensure the shavings don't clog up the works. I also had a thought about making a tray for between the lathe feet, which would catch most of the shavings and make hoovering these up much easier. I'll have a ponder about this over the next few days.

The last job this evening was another coat for the Banjo. I'll be able to put this back on again soon.



That's looking a lot better. Now all I need to do is paint the main column of the lathe, so I'm going to need some more primer as I've nearly used the existing tin up.

Assembly and first turning!

What a day!

Over the last few days I finished painting the legs, and as we'd done our Christmas duty with the In-Laws yesterday I was free to play today, so it was all steam ahead in the workshop as I'd decided today was the day I'd put the lathe together.

First on the agenda was stripping the main body of the lathe. My angle grinder warmed my hands whilst I removed all the paint...


I'd had to cover up well whilst doing this too...


All of the hard graft was worth it though, as the lathe went together easily and I got all of the electrics up and running first time. I must say that the detailed instructions from Newton Tesla were thorough and very easy to follow. I was very excited when I turned on the power for the first time, and set the speed to minimum - then hit the Fwd switch and I was away.

I'd also (through luck, not judgement) managed to wire the motor the right way the first time (so that when I hit Fwd it actually rotated forward), so after a bit of playing I thought it was high time to turn something.

The image below shows the lathe as it currently is - no paint on the main column as it's still too cold to paint, but at least we're above freezing now and a thaw is forecast so I may be able to cover this up soon. You might also notice in the image that I don't have the original tool rest - that was missing so I bought a Robert Sorby set from Stiles and Bates which did the trick nicely. I did have to cut down the stem as it was too long, and once again the angle grinder came into its own.


Wow, that was fun!. I received some bowl blanks and Banksia nuts for Christmas from the In-Laws (thanks!) so decided to wade straight in and made three mushrooms. I have to say I'm really pleased with them...



I haven't anything to finish these with at the moment so must purchase something soon before they get handled. Anyhow the wife likes them and I had a really great time turning them too.

More leg painting

I put another coat of primer on the rear of the legs (the tin’s looking decidedly low, I may need to buy some more to do the main body of the lathe). I then flipped the legs over and painted the first topcoat onto them too. If you are interested the shower problem from a week ago turned out to be a loose pipe, which I could luckily replace without having to damage the whole house. What a relief!

If I’d not been able to replace it in situ by going down through the waste exit in the shower tray then lord knows how I would have got to it, but it would have been expensive. Thankfully it was all done in a couple of hours, and despite having some remedial work to do in the cellar at least I stand a chance of getting my lathe up and running this year!

Finishing some parts

We’d had snow overnight so naturally I had to go out and play in it, so didn’t get to the lathe until later on in the evening. I repainted all the items from last night, and also put a coat of primer on the inside of the legs. I actually have some parts finished (well, once they are dry)!

The tailstock, handwheel, main bed, electrics cover and top alloy cover are all complete so can go back over to my workshop soon. And using Hammerite was a good idea – it’s much more forgiving than regular paint when it comes to covering over minor imperfections in the surface.

Paint purchase and first topcoat

Another hectic work week but it’s the end and also my Birthday, so I took the day off and spent most of it lounging around but decided to pop out for the topcoat later on in the day. I took my son (who is now off for Christmas) and we had a fairly long debate about the colour choice (his was dark Blue Hammerite, mine dark Green). I eventually decided my choice would suffice, so bought a decent sized tin and also a small tin of bright red that I’m going to pick the tailstock handwheel out with.

In the evening I painted the first topcoat on the tailstock, lathe bed, electrics cover and lid. Looks nice! I also painted the tailstock handwheel with red and it looks excellent.

Disaster, Faceplate turns up, Electrics

Not a good morning. When I got up and went down to my office in the cellar my son had already had his shower, and the wife was just about to jump in to hers. However, the contents of the shower wasn’t making its normal route through the wastepipe but instead had dumped itself into my office. Bah. I can see the day I get to use the lathe getting ever further away.

There was some excitement this morning as the faceplate I ordered has arrived and I’m home for the first day this week too so I’m able to try it. I unpacked it and was immediately dismayed to see that the thread was way too large to fit my lathe, and guessed it must be for a Graduate. Bah.

I emailed the chap and he was surprised it didn’t fit, but there was no quibbling about a refund however I’ll ponder that for a while as getting hold of Jubilee parts is likely to be much more difficult than Graduate spares, and so I may well hold on to this and have a threaded adaptor made up.

In the afternoon I left the soaking cellar and went off to Newton Tesla in Warrington to pickup my rewound motor and electrics package. The motor looked as good as new (well nearly!) and I really want to hook it up and get it working ASAP, but with the cellar problem I'm unlikely to get much free time until that's sorted. I also purchased a switch package that they've made for the Graduate which also fits the Jubilee. It has forward, reverse & stop switches, and also a potentiometer which changes the speed of the lathe. And that little lot all fits in the space where the original switch was. Sweet.

The cold weather isn’t helping either as it’s way too cold in the workshop to paint the lathe at the moment, and I don’t fancy lugging it home to paint it in the cellar as it’s a bit too heavy to cart around.

Painting and more stripping

First thing in the morning I gave the parts from last night another coat of primer, and wiped down the bed with white spirit ready to paint it. I also needed to sand down the filler on the alloy casting so went over to the workshop to do this whilst the white spirit evaporated.



I came back looking like a Smurf! I sanded down the filler until it was smooth and then gave all of the top another light sand. In addition I decided to tackle the legs of the lathe whilst I was dirty so gave them a good going over with the angle grinder & wire brush, and then I attacked the tailstock. I’d not looked at how to take this apart before but it was really easy – a grub screw unscrewed to remove the handle, and another machine screw held the rest together. I soon had it in pieces and sanded off all the paint on the main casting and also on the handwheel. The primer was really thick on the casting – more like a load of clay than a few coats of paint.

When I got back home I had masses of blue paint all over my face where the eye protectors hadn’t covered me up. I painted the alloy cover and also the main bed, and will leave the tailstock to warm up before I do anything with it.
I won’t get much done this week as I’m away with work.